|
Monoflo have over 45 years of experience in the design and manufacture of
progressing cavity pumps and grinders to suit many applications in waste
treatment facilities. Parts are available for
Monoflo and other brands of pumps. The information provided below is just an outline of some
of their products for more information please contact us or you can visit their
website at www.monoflo.com
PROGRESSING CAVITY PUMPS
Monoflo manufacture a complete line of progressing cavity pumps from small chemical
dosing pumps to large wide throat sludge pumps. They also have an impressive
parts program for most other brands of pumps.
|
|
COMPACT 'C'
PUMP RANGE
Capacity - up to 990 usgpm
Pressure - up to 350 psi
Features -
A
competitively priced progressing cavity pump, with a compact construction
and
maximum
performance characteristics.
Applications - Municipal and industrial
effluents, Lime slurry, Oils, Chemicals to name a few.
 Monoflo
Compact C Range Flyer |
|
|
EPSILON RANGE
Capacity - up to 1850 usgpm
Pressure - up to 350 psi
Features - PowerDrive™ transmission
with 10 year warranty. No lubrication is required therefore eliminating
product contamination.
Applications - Municipal Sludges,
Mineral Processing, Mine Water, Oils, Chemicals etc.
Monoflo
Epsilon Range Flyer
|
|
 |
EZstrip Sludge
Cake Pump
Capacity - up to 200 usgpm
Pressure - up to 348 psi
Features -
a specially designed feed chamber which is
easily disconnected allowing access to the
rotor and screw conveyor assembly. The
rotor can then be separated from the
conveyor allowing removal of the rotor and
stator while in-situ, without disconnecting
suction and delivery pipework. This
process can take as little as 6 minutes.
Applications - Municipal and industrial
effluents, Lime slurry, Oils, Chemicals and more.
EZstrip
Sludge Cake Pump Brochure |
|
|
ML
PUMP RANGE
Capacity - up to 380 usgpm
Pressure - up to 225 psi
Features - A
range of pumps designed to be directly interchangeable with traditional pin
joint style pumps.
Applications - Municipal and industrial
effluents, Lime slurry, Oils, Chemicals and more.
Monoflo
ML Range Flyer |
|
|
XL
PUMP RANGE
Capacity - up to 742 usgpm
Pressure - up to 180 psi
Features - A
range of pumps designed to be directly interchangeable with traditional gear
joint style pumps.
Applications - Municipal and industrial
effluents, Lime slurry, Oils, Chemicals to name a few.
Monoflo
XL Range Flyer
|
|
|
MONOFLO
PARTS
All parts carry Monoflo’s standard 12 month warranty. Parts are shipped
direct from their facility in Houston, Texas. |
|
|
|
|
|
UNIVERSAL
PARTS
Monoflo Universal
Parts offer a range of competitively priced,
high performance, durable parts that offer more
cost effective alternatives to branded PC pump
parts.
Parts are
available for the following pumps:
- Robbins &
Myers
- seepex®
- Netzsch®
- PCM
- Allweiler
- Bornemann
- Orbit
|
|
Monoflo
Universal Parts are covered by a 3 year warranty
against defects in materials and workmanship. |
Please see below for a brief
selection of the ranges we cover. For
others not listed, please contact us.
Monoflo can provide a direct
replacement pump that is dimensionally
interchangeable with some of the most common
progressing cavity pumps. The Monoflo ML
and Monoflo XL range are a direct
replacement for both competitor and Monoflo
pumps installed throughout North America.
 |
|
Monoflo Universal
Parts Brochure
Contact us for more
information and competitive pricing. |
GRINDERS
Typical applications would be as follows:
- Protection of submersible or dry well sewage
pumps prone to blockage problems.
- Economical solution to small headworks
requirements.
- Efficient disintegration of screenings prior
to treatment.
- Disintegration of sludge prior to dewatering
e.g. with centrifuge or belt press equipment.
- High volume fine grinding of sludge improving
digester efficiency.
- Solids size reduction at waste treatment
plants with septic receiving stations.
|
|
The
TR Muncher™ in-line grinder shown at left is particularly well suited to
grind septic waste, sewage and sludge. The built-in stone or trash trap
can be fitted with a flushing feature. The cantilevered dual shaft
cutters eliminate the need for lower bearings and seals thus reducing
maintenance costs and down time. The TR Muncher is available for pipe
sizes of 4",6",8",10" and 12" diameter. The SB
Muncher is available for smaller pipe sizes.
Monoflo TR Muncher Flyer |
| |
|
|
|
The
Series ‘A’ Muncher™ shown at left is for channel applications and is
available with throat depths of up to approximately 1.5m (60”).
Monoflo
Series A Muncher Flyer |
|
|
|
 |
The CT201 TR Muncher™ shown at left is for
pipeline applications,
Monoflo
CT201 TR Muncher Flyer |
|
